BACK IN STOCK NOW
Curien N2BASE01 N2 Neuron
The N2 Neuron Dual Channel Wireless Graphing Multimeter provides electrical testing accuracy and versatility in the palm of your hand. This wireless graphing meter is built shop tough and ready to fit into any situation providing the right readings and the right measurements the first time. By wirelessly connecting to your Curien smart device or existing android or windows scan tool, or iOS device you can use the big screen you already own for real time readings, wave form analysis, graphing and logging. If a job requires you to go for a test drive, no worries!
Volts, Ohms & Amps Measurements to test motors, wires, components, sensors, batteries and more
2 Voltmeters onboard allow for transducer and voltage measurements to be used simultaneously for data relationships such as I=VR Calculations, Efficiency testing and other advanced understandings.
App with Database & Community For data readouts, graphing, logging, and sharing data.
Dual Channel Read outs (simultaneous) to see how one circuit affects another.
24 Bit Resolution for more information about the circuit per sample cycle. (for Data relationship testing, great accuracy for parasitic draw testing and more)
Graphing & Logging for visual diagnostics and playback.
Community Driven App and firmware updates for continuous relevant improvements.
Standard 4mm Banana Jacks
Accepts BNC Adapters for transducers and connectors
Over the air updatable firmware and app for adaptation and improvement with the future of the market and technology needs.
2 Year Warranty
* Tablet not included
N2 - Neuron Specification Table
Specifications for N2 - Neuron
|Neuron Specification Table
|As of 05/01/2020
|Up to 600V, DC or peak AC
|Protocol: Bluetooth Low Energy
|Up to 420VAC RMS sinusoidal
|Better than 0.5% accuracy DC
|Better than 1.0% accuracy AC for harmonic content below 1kHz
|The wireless range has been tested empirically through the following media to an iPhone 5.
|>10 Megaohm input impedance
|50m air, line of sight
|High Precision Voltage:
|5cm of refrigerator, door closed
|Up to 100mV with <15nV per count resolution
|Engine compartment to the passenger seat of most vehicles
|Up to 1.2V with <200nV per count resolution
|10m air + safety shield of a Tesla Coil rock-bands testing facility
|>10 Megaohm input impedance
|If used outside of the measurement range (0-1.2V), the overvoltage protection circuit will short this to the common (“C”) input.
|Simultaneous high-speed sampling of voltage and current gives the following power measurements:
|Up to 10 Amps
|20 µV / mA burden voltage (using factory fuse)
|Less than 5 µA per count in 10 Amp scale
|Reactive, Complex, Apparent Power
|Better than 1% accuracy
|Total Harmonic Distortion
|Phase Lead or Lag
|Better than 1% accuracy over 20 Ohms – 20 Megaohms
|Measure the supply sag under load to estimate:
|Better than 1% accuracy up to 1kHz
|Supply or Battery equivalent resistance
|Battery State of Health
|Up to 1V @ 100nA
|Current Measurement, External Shunt
|Measure thousands of amps with sub-milliohm shunts
|8kHz dual simultaneous sampling
|Measure precision currents with large shunts
|4kHz analog bandwidth for most measurements
|Use the existing wiring for “quick’n’dirty” measurements
|24-bit resolution max
|Use 1′ of 10AWG for 12µA per count resolution, up to several times the wires ampacity.
|>18 Effective bits at 125 samples per second
|On Board Storage – SD Card
|Steinhart-Hart or Beta parameterized
|Up to 32GB
|More than a week of constant logging two channels at 8kHz
Excellent value for money . A go to tool that saves time and money .load testing is a real.timesaver
Excellent meter really impressed. Good value. Great service and communication. Definitely recommend impact diagnostics.
A really handy multimeter with a very useful scope for your first checks, brilliant value for money